Reboot your computer. Press F8 before the Windows XP logo appears, but after the BIOS screen (the screen with the manufacturer’s logo and / or system information). When the boot options screen appears, select Last Known Good Configuration (Advanced). Press the Enter key.
Interacting With Players
Every time you browse the Internet or work on your computer, your computer suddenly restarts, and the next time you turn on your computer, you will receive the message “The system received a critical warning. the error recovers on startup.
The error message also displays information about the dump files when you click the “Click here” message. Windows Error Reporting may prompt you to submit this report to Microsoft if error reporting has not been disabled on your computer.
How to fix: “C or USB drive won’t open from my computer”
Why is this error appearing on my computer?
When your computer stops responding, small dump files are generated containing detailed error information in a folder called Minidump in the Windows directory. This is useful for analyzing the problem.
If your computer shuts down after restarting, a check box will be checked in the paging file to indicateWhich requires writing a dump file.
How to fix “Master volume” cannot be turned off at the moment “
How to fix this error?
This problem can be solved by creating a new paging file again.
1. Log in to your computer with administrator rights and right click on My Computer> Properties
2. Select “Advanced”> under “Performance”> click “Settings” and select “Advanced” again in the performance options
3. (Before changing virtual memory, make a note of the custom paging file size you set.) Then, in virtual memory, click Change.
4. Select “No paging file”, click “Install”, click “OK” and restart your computer. If you receive a warning, proceed with the restart.
When Windows encounters certain situations, it pauses and the resulting diagnostic information is displayed in white text on a blue screen. These errors cause the term blue screen or blue screen to appear.
Blue screen errors occur when:
- Windows encounters an error that cannot be corrected without data loss.
- Windows detects that critical operating system data We have been damaged.
- Windows detects an irreversible hardware failure.
- The exact display text has changed over the years from the dense information wall in Windows NT 4.0 to the relatively sparse message used in modern versions of Windows. (Figure 1)
Something went wrong and Windows shut down to avoid damaging your computer.
If this is the first time you see this error screen, restart your computer. If you see this screen again, do the following:
Make sure you have enough free space. If the stop message lists a driver, disable the driver or contact the manufacturer for driver updates. Try changing video adapters.
Check with your hardware manufacturer for BIOS updates. Disable BIOS memory options such as caching or shadow copying.
If you need to use Safe Mode to remove or disable components, restart your computer, press F8 for advanced startup options, and then select
Technical information: p>
*** STOP: 0x000000ED (0x80F128D0, 0xC000009C, 0x00000000, 0x00000000)
Fig. 1. An example of a blue screen error
How To Fix Blue Screen Of Death
The most important step in troubleshooting Blue Screen of Death is to ask yourself what you were doing before the device stopped working.
Have you just installed a new program or hardware, updated your driver, installed a Windows update, etc.? If so, there is a very good chance that the change you made caused the BSOD.
Undo the change you made and check the STOP error again. Depending on what has changed, some solutions might include:
Make sure there is enough free space on the drive where Windows is installed . Blue screens of death and other serious problems such asHowever, data corruption can occur if there is not enough free space on your main partition.
Microsoft recommends leaving at least 100 MB of free space, but you regularly encounter problems with such a shortage of free space. It is generally recommended that Windows users always keep at least 10% of the free disk capacity.
Scan your computer for viruses . Certain viruses can cause Blue Screen of Death, especially those that infect the Master Boot Record (MBR) or boot sector.
Make sure your antivirus software is fully up to date and configured to scan your MBR and boot sectors.
If you can’t get far enough to run a virus scan on Windows, use one of the programs we highlighted in our list of free bootable antivirus tools instead.
Apply all available Windows Service Packs and Updates .
Microsoft periodically releases fixes and service packs for its operatingsystems that may contain fixes for the cause of your BSOD.
Update your hardware drivers . Most Blue Screens of Death are hardware or driver related, so updated drivers can fix the cause of the STOP error.
Check the system and application logs in Event Viewer for errors or warnings that can provide more information about the cause of the BSOD.
Event Viewer can be opened through administration.
Reset hardware settings in Device Manager to default values.
Unless you have a specific reason to do this, the system resources for which individual hardware is configured in Device Manager should be set by default. Non-standard hardware settings have been known to cause a blue screen of death.
Reset BIOS settings to default values. An overclocked or misconfigured BIOS can cause all sorts of random problems, including BSODs.
If you have made a few changes Go to BIOS settings and don’t want to load defaults, at least try resetting BIOS clock, voltage settings and memory settings to their original values. default settings and see if that solves the problem. STOP -Error.
Make sure all internal cables, cards, and other components are properly installed and installed. Hardware that is not permanently installed can cause a blue screen of death. So try repeating the following and check the STOP message again:
- Reinstall memory modules
- Reinstall all expansion cards
Update BIOS . In some situations, an outdated BIOS version can cause a Blue Screen of Death due to certain incompatibilities.
Start your computer only with the necessary hardware.
A useful troubleshooting step in many situations, including BSOD issues, is to start up your computer with the minimum hardware required to run the operating system.