Home News Canon Pixma 860 B200 Error Code Issues That Are Easy To Fix

Canon Pixma 860 B200 Error Code Issues That Are Easy To Fix

60
0

 

Hope this guide helps you when you have Canon Pixma 860 b200 error code. The dreaded B200 error on your Canon printer usually indicates the print head is dead! The next method is to reload the printer drivers, as in some cases the B200 error code can be caused by a corrupted driver. 5. Turn off the printer and unplug it for at least 2 hours.

 

 


Solution 2:

Solution 3:

Canon MX860 B200 error code

Anyone who owns or uses a Canon inkjet printer can find the B200 error code at a specific location on the printer. This error bothered many printer users every time this error occurred, because this problem cannot be predicted in advance.

canon pixma 860 error code b200

For error code B200 on Canon MX860, Canon technicians recommend users to make general fixes for this issue. This recommendation is equivalent to turning the printer off and on again. However, we have found fixes that are more robust against printhead solutions.

Error B200 calls Â:
Why is the printer defective and what are the causes of this printer error?

Among the reasons :

An error occurred in the printer when a sheet of paper was printed and the ink is completely empty, assuming the cartridge is completely empty.

This also has to do with third-party cartridges that the printer cannot handle, Canon says. Cleaning andinspecting the printheads will help resolve this error. However, you should remember that a solution will only come if the printer is no longer under warranty, as the warranty may be void as you could damage the printhead.
Another reason :

Another reason for this error usually occurs when the printer uses different ink formulas. This error sometimes occurs when you replace or refill an OEM cartridge with an illegal product, and that product usually comes with cheap supplies of questionable toner quality and / or workmanship.

Troubleshooting Guide :
How do I fix a printer with a B200 error?

There are two steps to fix this error. The technical phase of the printer hardware and the technical phase of the software.

Phase 1 : Technical Content Phase

As of now, we have five solutions to fix the B200 printer error code. These decisions are based on the vast experience of printers who have repeatedly encountered the samethe same mistake.

Find fixes and solutions for this problem. We will provide step-by-step instructions on how to fix this problem. Choose one of the five available solutions below:

  1. Turn off the printer.
  2. Disconnect the printer from the power source.
  3. Open the printer cover and open the ink cartridges.
  4. Carefully remove the printhead from the printer.
  5. Clean the print head and ink cartridges.
  6. Clean the printer’s contact surfaces with a contact cleaner or a good eraser.
  7. Reinstall the printhead.
  8. Then reinstall the ink cartridges before turning on the printer.
  9. Run the auto head alignment function to check the printer.
  1. Turn off the printer.
  2. Open the print head housing (as if you want to replace ink).
  3. Turn on the power.
  4. Wait for the cart to move to the left and let it go halfway.
  5. Close the hood before the carriage reaches the left side (but halfway).
  6. Turn on the printer again.

Many users printers try this simple solution and the printer problem is solved.

  1. Turn off the printer.
  2. Disconnect the printer from the power source.
  3. Remove ink cartridges.
  4. Fold the dark gray frame together.
  5. Remove the printhead.
  6. Rinse the print head well with warm water. For best results, use Tylenol or rubbing alcohol.
  7. Wipe the print head with soft absorbent paper.
  8. Purge the printhead with air.
  9. Let the print head dry for 1/2 hour.
  10. Fold Dark Gray Border
  11. down

  12. Install the printhead.
  13. Collect the ink cartridges.
  14. Reconnect the printer to the power source.
  15. Turn on the printer again.
  16. Start the printer.

Solution 4:

  1. Turn off the printer.
  2. Disconnect the printer from the power source.
  3. Open the printer cover and remove the color cartridges.
  4. Remove the cart in which the cartridges were previously installed.
  5. Rinse the cartridges carefully with water. For best results, cleansee with isopropanol (at the pharmacy) to prevent the print head from clogging up with lime.
  6. Make sure the gold contacts are not wet, otherwise you may damage the printhead.
  7. Dry everything thoroughly and make sure no residual water gets into the printer.
  8. Install the cartridges and carriage first.
  9. Turn on the printer again.

If Error B200 appears again, the printer must be turned off again. And before turning on, the flap must be opened. When you turn it back on with the flip open, the printer performs a self-test: then the error should not appear more often, it works, and the problem is resolved.

  1. Unplug the power cord.
  2. Open the printer.
  3. Slide the entire print head mechanism towards the middle.
  4. While the printer is open, connect the printer and turn it on.
  5. If the print head is still moving and pointing all the way to the left, close the cover.
  6. Wait for it to start.

If you tried to follow the step-by-step guide of the first step and the error persists, proceed to the second step below.

Stage 2 : T the technical phase of the software

At this point, you will need an Internet connection and administrative access to your computer. At this point, do the following:

  1. Update the printer drivers and the Canon IJ Printer Utility software.
  2. Click Start on the Windows desktop, then click Devices and Printers.
  3. Right click on the Canon MPxxx (depending on your Canon code version) and select Properties.
  4. Select the Maintenance tab and click Deep Cleaning.
  5. After completing deep cleaning, perform a nozzle check on the Maintenance tab.

Canon B200 Printer Error Code – Causes

  • Canon b200 printer error code sometimes appears when purchasing a cheaper printer.
  • Using cartridgesthird party manufacturers in Canon printers causes problems. Because the printer cannot handle other people’s cartridges.
  • Refilling the cartridge with an unknown product may result in an error with the Canon b200 printer.
  • Before turning off your Canon printer and buying a new one, we would like to inform you that this article provides the best solution to fix the Canon b200 printer error in all Canon printer models, including the canon mg5200 b200 printer error.

    Which error of all Canon printers can this solution fix?

    Canon MX850 Printer Canon Pixma MX712 Printer Canon MP620 Printer Canon MX712 Printer Canon MX850 Printer
    Canon MG5200 Printer Canon MP560 Printer Canon MP540 Printer Canon MX892 Printer Canon Pixma MG5220 Printer
    Canon MP280 Printer Canon MX922 Printer Canon MP620B Printer Canon MG5320 Printer Canon MG5220 Printer
    Canon Pixma MX892 Printer Canon Pixma MP620 Printer Canon Pixma MP560 Printer Canon Pixma MG5320 Printer Canon MX892 Printer
    Canon MX882 Printer Canon MX870 Printer Canon MX860 Printer Canon MP640 Printer Canon MP630 Printer
    Canon MP620 Printer Canon MP540 Printer Canon MG5320 Printer Canon MP550 Printer Canon MG5250 Printer

    How do I clear the error on my Canon Pixma printer?

    Reset Canon Printer Settings
    1. Turn on the printer.
    2. Press and hold the Stop / Reset button.
    3. Press and hold the button while making a color copy.
    4. Wait 5 seconds.
    5. The printer will now restart and configure itself.
    6. Does the printer indicate the need to calibrate the device?
    7. You have reset your printer settings.