Table of Contents
Approved
In this blog post, we will describe some of the possible reasons that Audi Concert Stereo safe mode might trigger and then provide possible fixes that you can try to fix the issue. g.The radio is turned on and displayed in SECURE mode.Press and hold each of our FM 2 and RDS buttons at the same time until the number “1000” lights up.Use extension keys 1 through 4 to enter the dialing code.
g.
It works with Audi Concert II CD / Radios from 2000 to 2006, which usually connect to Audi TT, A4, A3, S4.
Step 3. Use the keys to enter the code 1,2,3,4. After all, you must press each key once.
Step 4. After entering the code, press and hold the SCAN and RDS switches to complete the process. The radio is now turning on!
Just follow the steps below to turn this radio back on when the display shows “SAFE”. It is important that all procedures are performed in the correct order.
Approved
The ASR Pro repair tool is the solution for a Windows PC that's running slowly, has registry issues, or is infected with malware. This powerful and easy-to-use tool can quickly diagnose and fix your PC, increasing performance, optimizing memory, and improving security in the process. Don't suffer from a sluggish computer any longer - try ASR Pro today!
1. Turn on the radio. The radio displays “SAFE”.
2. Press FM2, then the RDS buttons and enter “1000” at the same time until the screen appears. Release the buttons. DO NOT press all of these buttons again, otherwise the radio may read “1000” in the code you see.
3. Enter the current four-digit code from the card of your device using the preset control buttons 1 … 4. Preset button 1 is the first digit, the preset button is the second digit, that is, it. Each time you press the button, the number increases by 1.
4. When the code displayed on the screen is correct, press and hold the FM2 and RDS buttons at the same time until the word “SAFE” appears on the screen, then release these buttons.
5. The device should unlock and be ready for use shortly thereafter.
6. If an incorrect pr was enteredIf the code is correct, the message “SAFE” will appear, which at first flashes continuously and continuously. You can repeat the steps in ascending order to unlock the radio the next minute, the number of attempts will undoubtedly be displayed on the screen. If an incorrect code is entered, your radio will be blocked for approximately one hour. An hour later – the radio should remain on and the key in the ignition – if I said the display was off, you would probably repeat the unlocking procedure above to help you again. Cycle – two injuries, one hour – the lockout still applies.
7. If you have lost the radio code, contact your Audi dealer.