Table of Contents
If you have an hp probook 4440s BIOS administrator password on your system, this guide will help you fix it.
Approved
Default boss or root password for all build plans provided by HP: ChangeMe123! WARNING. HP strongly recommends that you change this account information before deploying to servers.
Managing The BIOS Administrator Password
Open Computer Setup by turning the computer on or off. During the “Press the ESC key
The message
** Hold Windows Key + Up Arrow + Down Arrow and turn on the laptop. Release and hover over the HP home screen buttons. This should take you to my BIOS where you should have an option to “Reset BIOS Security to Factory Defaults” and confirmYes by selecting Yes. Exit BIOS and save changes.
for the start menu” is displayed in the lower left corner of the entire screen, press esc. When
Use the guide or arrow keys to select Security > Configure BIOS Administrator
To set a BIOS administrator password, enter your password in the Enter New Password field
To change the personal information of the BIOS administrator, enter your current password in the current Enter key
In the Current password field, enter an extended password in the Enter a new password field and confirm the password.
To reset the BIOS administrator password, enter the current password with Enter
To also save your changes, exit Computer Setup by using the arrow buttons to select Exit > Exit Save.
Entering The BIOS Administrator Password
When prompted for “Enter password”, enter your administrator password, then click Enterwaters.” After 3
Turn off the computer and immediately press the ESC key to open the boot menu, then press F10 to enter the BIOS setup program. 2. If you entered your personal BIOS information incorrectly three times, a screen will appear prompting you to press F7 for HP SpareKey Recovery in the market.
unsuccessful attempts to enter the administrator password, you must restart the corresponding computer and try
Sometimes this requires you to regenerate the BIOS password in order to enter the BIOS and change its settings (for example, change a specific boot order). This formula for resetting the BIOS on a desktop computer is a relatively simple process because in most cases you just need to unplug the power cable and CMOS/BIOS battery for a few minutes, or short the CMOS CLEAR jumper on the motherboard (if it has one).
On the other hand, assuming you have a laptop, resetting the BIOS/CMOS setup code will be more difficult, especially if accessing the battery CMOS is not easy.
This guide lists all available methods to remove/reset the BIOS/CMOS password on HP Probook, Elite, or Pavilion laptops.
How to reset BIOS settings when changing HP laptop
Method 3: Reset CMOS password using the HP BIOS Setup Utility.
Method 4: Reset the BIOS password using the HP Probook/Elitebook BIOS Account Reset Utility.
Method 1: Remove the CMOS/password battery.
Approved
The ASR Pro repair tool is the solution for a Windows PC that's running slowly, has registry issues, or is infected with malware. This powerful and easy-to-use tool can quickly diagnose and fix your PC, increasing performance, optimizing memory, and improving security in the process. Don't suffer from a sluggish computer any longer - try ASR Pro today!
The first way to remove the BIOS password on an HP (or non-HP) desktop or laptop computer is to find and remove the CMOS battery for a few minutes. To complete this task:
1. Find out the location of the CMOS/battery by doing a simple terrestrial search on how to replace the CMOS battery in your laptop model or motherboard.
2. Once you find a lot of information, turn off the power cord and unplug all power cords from the computer.
3. Follow the instructions to open the laptop case.
4. Take out or remove the cmos* battery by yourself for 6-10 minutes to also clear the cmos settings, clear the cmos password.
5. Reconnect. Put the CMOS battery back in (or put it back in) and then close the case with someone.
6. Turn on the computer and enter the BIOS setup program.
Method 2: Reset the BIOS password using the master password.
1. Turn on the laptop and press the corresponding function key to enter the BIOS/CMOS setup program.
2. Enter (3) three wrong password options.
3. You will receive the message “FromSystem disabled” and code.
4. On another working laptop, go to the Clear BIOS
passwords page.5. Enter the displayed numeric code, the message “System Disabled” and “Retrieve Snap Password”.
6. Restart your locked computer and enter the suggested passwords to the right of the Clear Bios Passwords website.
Method 3: Reset the CMOS password using the HP BIOS Setup Utility.
1. Download the HP BIOS Setup utility from One Person.2. Create a BIOS setup utility on the current system.
3. Pay attention to this installation folder “HP Config Bios Utility (BCU)” during the installation process. *
*Note. The BCU is usually installed in “C:Program Files (x86)HPBIOS Utility”.
4. At the command prompt, change to the HP Bios Utility config (BCU) installation directory by typing the following command:
5. Then run the following command to remove the BIOS/CMOS setup password on an HP laptop:
6. If everything goes well now, you will get the message “Configuration Password Generated Successfully”. *
7. If someone gets an error message that your system is not supported. HP is notCan connect to the WMI namespace (see screenshot below), do the following:
one. Download HP System Software Manager (SSM) sp2095 version.exe* from here
*Note. Remember this SSM plan works best with Windows 7, Vista or XP)
b. Open command prompt as administrator.
C. Navigate to the BCU region “C:Program Files (x86)Hewlett-PackardSSM” from a command prompt window.
D. Then enter the correct command: *
* Optionally, replace the quoted letters pwd with a password of your choice.
i.e. The BCU should reply: “Configuration password changed successfully”. .
F. Restart your computer and perform important BIOS settings using the password you provided.
Method 4: Reset the BIOS password using the HP Probook/Elitebook BIOS Password Reset Utility. *
Note. The following BIOS password reset method has been tested on the following HP laptops (source):
HP Elitebook 2530p, HP Elitebook 4310s, HP Elitebook 4510s, HP Elitebook 6930p, HP Elitebook 8460p, HP Elitebook 8530w, HP Probook 2230s, HP Probook 2560p, HP Probook 2730p, HP Probook 2740p, HP Probook 6460b, HP5 Probook 645 , hp probook 6535B, hp probook 6550B, hp probook 6730B, hp probook 6735B, hp probook 8440P, hp probook 8530P, hp probook 8540, hp probook 8560P, hp probook 8560W, hp probook 8560W, hp probook 8730W
The software to fix your PC is just a click away - download it now.This account information is also known as the “administrator password” or “supervisor password”, which is chosen to prevent others from changing BIOS settings. … This password will probably also be called “user password” or otherwise “power-on password”, and it can prevent someone from turning on your computer.
