Table of Contents
Approved
In some cases, your computer may display an error code indicating that the Device Manager screen is blank. There can be several reasons for this problem.
If your individual Device Manager is completely empty, or possibly empty, there are two possibilities for the problem to occur: either you disabled a useful Windows service, or your registry permissions for the Device Manager key are corrupted.
Device Manager is a useful Windows utility that you can use to view and manage device drivers and peripherals connected to your Windows PC. But from time to time the Device Manager is blank or empty according to user feedback on the Tech Forum. If you’re having the same problem, you can read this article, which focuses on solutions to fix Device Manager rather than everything that appears in Windows 10.
Possible Solutions To Resolve The Problem With A Blank Device Manager Window Up To Windows 10
Typically, the main reasons why the mechanism manager is blank or empty is because the Plug and Play service is not running or the affected computer system’s registry key does not have superior security permissions. To fix itt aspect, there are two solutions that your entire family can turn to:
Solution 1: Enable The Windows Plug And Play Service
Scroll down and you will also find Plug and Play in the list of services.
On the left navigation bar, select Devices > Manage.On the Manage page, check the box next to the device you want to wipe, then select Factory Data Reset from the main Manage drop-down menu.
Then double-click on it and a window will open. Simply click “General Check” and select “Automatic” from the “Startup Type” drop-down list, then click “OK” to confirm.
Solution 2: Change Resolution
As mentioned above, an empty tool manager in Windows 10 can also easily be caused by a Windows registry key that hasn’t been given the right security permissions. Therefore, you can try changing the registry permission to fix this particular problem. Do the following:
Press Windows + R to open the Run dialog box, type regedit in the box, and press Enter to open the Windows Registry Editor.
Find the user or group information where there should be two more entries (Everyone and System). When it’s empty again, click “Add Selection”, type “All” and see “OK”. Also don’t forget to purchase the Read by Allow option.
When you’re done, go back to the Click Add, not to mention object handles to select them… and type System. Then click “Check Names” and click “OK” to confirm.
This is usually where you need to enable the “Read” and “Allow Full Control” columns for “System”.
Here’s how to fix Device Manager in Windows 10. Just try our suggested solutions. If you have a problem with the life of your Windows 10 computer, such as the login password not working or the computer is blocked from the Internet, the Windows password key can help. 10/8.1/8/7.
