You may encounter an error with the ip4500 ASF 5700 camera sensor error message. Now there are a number of steps you can take to resolve this issue which we will discuss shortly.


  • 1. Download ASR Pro
  • 2. Open the program and select "Scan your computer"
  • 3. Click "Repair" to start the repair process
  • The software to fix your PC is just a click away - download it now.

    If The Solution Above Does Not Resolve Your Error, Contact A Canon Authorized Print Service. Call | Now +1-855-517-2433

    Error rules 5700 is an ASF cam error. Cam sensor error ASF. If this continues, the gears will not be able to rotate properly, resulting in a squeak and 5 spin flashes (SFP) or ##356


    The ASR Pro repair tool is the solution for a Windows PC that's running slowly, has registry issues, or is infected with malware. This powerful and easy-to-use tool can quickly diagnose and fix your PC, increasing performance, optimizing memory, and improving security in the process. Don't suffer from a sluggish computer any longer - try ASR Pro today!

    CANon Ip3000 Error 5700

    Code 5700 is most likely an ASF camera bug. Here’s how Canon can fix it! DESCRIPTION: A few alternating flashes of (SFP)/(MFP)##356, such as z, will cause the plastic rail to fully move away from the case. When this happens, the device fails to rotate properly, causing a click and 5 intermittent flashes (SFP), also known as ##356 (MFP) – ASF Cam Sensor Error. Procedure Step 1: Remove the left and right covers and the main body (main unit cover). Step 2: Remove the 4 mounting screws from the case. 3: Step Remove the main unit from the bottom of the case. device upside down (upside down), and then place it on a work surface. Step Ideas: Inspect the ASF area of ​​some head unit for a gap between the white boardstick guide and housing. Note. Actual gap size may vary. Even if the square is not visible, follow the instructions below. Step 6: Disconnect the related cables and also remove the motherboard from the main body (located behind the Good Sense card) on the case. Reinstall Step 8: The all white plastic rail so it rests against the case. The tip of the white plastic guide should lightly rest against the mounting screw hole. With a proper fit, the gap usually no longer exists. Step 7: Tighten the 4 mounting screws without moving the plastic guide. step

    The software to fix your PC is just a click away - download it now.