Table of Contents
If you are getting error 1203 of the lexmark p4350 user manual, today’s user manual is here to help you.
Approved
Causes of Error Code 1203 Error code 1203 can occur due to a problem with the printer cartridge. This cartridge problem keeps printing. Due to a problem with the cartridge, the printer is unable to transfer prints, or the ink used for printing may not properly drop onto the paper.
The 1203 error message is likely caused by a loss of communication between one of the printheads (cartridges) and a multifunctional device (AIO), or a short circuit in a specific printhead.
Lexmark Printer Error 1203-
When the printer is on, remove the cartridge.Turn off the model.Light it upHow do I know if the cartridges are properly reinstalled?Check your entire control panel to make sure it still displays error 1203.Check the control panel again.
A Lexmark 1203 communication error is caused by communication problems between one of the printheads (cartridges) and a multifunctional device (AIO), or a short circuit in one of the printheads.
To Fix This Lexmark Error, We Have Listed Several Solutions For You.
- Discard the photo cartridges and close the toner cartridge covers.
- Unplug the outlet from the outlet.
- Standing up againPlug the power cord into a power outlet.
- If the power switch is not on, press it again and reinsert the cartridges.
When the printer is on, clean the cartridge.Turn off the printer.Light it upHow do you actually reinstall the cartridges?Check your current control panel to make sure it still displays error 1203.Check the contractor panel again.
If the error does not recur, the issue is resolved.
If the crisis recurs, the cartridges won’t work perfectly. Use the method provided to determine which cartridges are not working properly.
- Empty the created cartridges and close the owner cartridge covers.
- Unplug the power cord from the outlet.
- Reconnect the power cord for easier connection.
- If the socket does not turn on frequently, remove the test socket.
- Replace the dark (or photographic) reservoir print.
- If an error occurs:
- If an error occurs, remove the black ink cartridge and install a new important one.
- If not, paint over the cartridge.
- However, if an error occurs, replace the print cartridge with a new one.
This answer was accepted by the author of the original question.
Error 1203 is caused by a communication failure between one of these print headswok (cartridges) or multifunctional device (AIO) and / or a short circuit in one of the printheads. Please fix this problem.
Resolving a communication error between cartridge and printer
Turn off the corresponding AIO and remove the power supply from the back of the device. Wait 30 seconds, then reconnect the power and turn on the AIO.
Was there an error? Did you receive your message?
Yes: Go to step 2.
No: Print a test page. If an introductory page is printed, the error has most likely been resolved.
Open the top cover of the AIO and remove the two cartridges from the main AIO. Off
Turn on AIO and disconnect the power supply from the device. Wait 30 minutes, then reconnect the power and turn on the AIO.
Was this error message coming back?
Approved
The ASR Pro repair tool is the solution for a Windows PC that's running slowly, has registry issues, or is infected with malware. This powerful and easy-to-use tool can quickly diagnose and fix your PC, increasing performance, optimizing memory, and improving security in the process. Don't suffer from a sluggish computer any longer - try ASR Pro today!
Yes. There is a DIY problem with your printer. Continue to contact Lexmark.
Turn off the AIO and do not disconnect the power from the rear panel of the device. Reset the actual power, power and all-in-one. Open the top cover and insert the cardTrij with color scheme. Close the top cover.
Yes: Continue cleaning the cartridge contacts, then repeat step 4. If you did try to clean the contacts, continue with the failed cartridge test.
Turn off the all-in-one and normally unplug the power supply from the back of the device. Reconnect the AC adapter, power and all-in-one a. Open the top cover of the all-in-one and insert the black / photo cartridge. Close the top cover.
Are all error messages returned?
Yes: Continue cleaning the contacts on the cartridge, then return to step 5. If you have already tried to simply clean the contacts, continue to use the defective test cartridge.
No: Print a test page. If a test page prints, this error has been resolved. Disabled
Turn on the all-in-one or disconnect the AC adapter from the back of the device. Reinstall the AC adapter, power supply, and all-in-one. Open the top cover of the all-in-one and insert the black / photo cartridge. CloseRemove the top cover.
Did you receive an error message?
To clear the message, it is common to turn off the printer, replace the cardboard box, and turn on the printer. If the error message persists, call support.
Yes: continue with the vacuum cleaner contacts, then repeat steps 5. If you have already tried cleaning some of the contacts, continue with the faulty test cartridge.
No: Print a test page. Any test page will print, the error has just been resolved.
Lexmark is listening
Phone:
USA: 1-800-539-6275
Canada: (877) 856-5540
United Kingdom: 0800 121 4726
South Africa 08:00: 981 435
Turn off Lexmark tattoo. Turn on the Lexmark printer and hold down keys 2 and 12 at the same time for at least 15 short periods. You will be taken to the service mode. In service mode, scroll down or go and select Restore factory settings.
