Table of Contents
Approved
Here are some easy ways that can help you fix the Lexmark x6100 50c cartridge error problem.
X5100/X6100 Lexmark 50C 401 502 Hardware Error
How to fix and reset a Lexmark printer hardware error. Issues: Hardware Error: “401” on LCD, Hardware Error: “50C” on TV LCD, Hardware Error: “502” on LCD.
1. Press the power button to turn off the all-in-one.
2. Turn off your All-In-One.
3. Make sure the code reader is unlocked.
4. Connect your all-in-one.
5. Press the power button to turn on the All-In-One last.
1. Press the power button to turn off the all-in-one.
2. Turn off your All-In-One.
3. Then remove your correct cartridges and put them back in.
4. We connect our monoblock and press the power button again. See this article for more information.
1. Press the power button to turn off the all-in-one.
2. Turn off your All-In-One.
3. Check for jams in the boxes.
4. Connect your all-in-one.
5.Press the power button.Help to turn your All-In-One back on.
502 x5100 Hardware Error, Lexmark x5100 50C 401 Hardware Error, Lexmark x5100 Hardware Component Error Fixed, Troubleshooting Dell Hardware Error 0502, Device Error 0502, Lexmark Fix
User’s guide – Page 1
… 9Information about defective parts of the printer and software.• “Network” at 75How to use your All-In-One anywhere in a network environment.• “Maintaining the All-In-One” on page 76.Save your list and order cartridge supplies.• “Troubleshooting” on page 87+Information configuration problems, error messages, print quality problems…
Approved
The ASR Pro repair tool is the solution for a Windows PC that's running slowly, has registry issues, or is infected with malware. This powerful and easy-to-use tool can quickly diagnose and fix your PC, increasing performance, optimizing memory, and improving security in the process. Don't suffer from a sluggish computer any longer - try ASR Pro today!
User’s guide – Page 7
…with your all-in-one: • Power adapter • Cord • Setup instructions • Installation software CD • User’s guide • Black cartridge • Color cartridgeThe instructions on the start sheet will show you how to successfully set up a workingtable, then click Help.oneThe User’s Guide provides an introduction to: • The basics…
User’s guide – Page 15
…-In-One is available in various designs. One model has an automatic document feeder (ADF), the other does not.The Lexmark X6100 series is a dedicated color scanner, printer, color copier and color facsimile machine.
User’s guide – Page 34
… Source document (text snippet above) Print properties. Failure to do so will result in a card jam.• Before loading banner paper, you will remove all paper behind the paper support.• Place a stack of paper inkjet flags.• You will find the Letter Banner or A4 Banner in ADF format (available on home page 19.
User’s guide – Page 44
… This is the default value.Select the time to enable power reduction: •…) • High• Check the ink level. • Replace capsules. • Align the cartridges. • Clean the capsules. • Print a test page. Note. You can… definethe color intensity of the selected original. Specify the document size on any imaging medium by pressing the button on the panel. From the presentation of this menu: REPEAT IMAGECOLOR…
Manual – Page 82
Caring for your All-In-OneUsually replace cartridgesThe Lexmark X6100 Series printers use our following cartridges:Item: Black Cartridge Color CartridgeArticle: 82 83 or 88Note. See website 86 for more information on ordering accessories.1 Make sure the all-in-one is literally busy.76 tactics and saves from cartridge holder to reload position…
Manual – Page 86
… selection of parts thatdisplayed on the control panel to answer questions that are most often the number of the cartridge you normally use, press the right pointer button until the correct number of coins appears, then press… tissue holder.10 Use the buttons on the current display: a If the color tube you installed is new (it neverin use), press the smart arrow once -buttons, then media…
User’s guide: page accessoriesUp to 92
Order universal supplies or find your nearest reseller. To do this, go to the Lexmark Web site at www.lexmark.com. Item: USB cable with black color cartridgePart Number: 82 83 or 88 12A240586
Manual – Page 93
…is not connected to your computer.• Your operating system is considered installed in the left tray, as is the color of the cartridge in the corresponding tray. See Report 76 for information.• Paper that is screwed on… an electrical outlet.• The cartridge is installed correctly. For help choosing a scanner lock, see page 76.• Have you removed the sticker and adhesive from the underside of All…
Manual – Page 94
…remove appropriate stickers, clear tape, foam and right from under the entire printer. Note. If you turn All-In-One back on.• The all-in-one connects directly to your computer.• The multifunction device is installed by default with your inkjet.inter.• You install both designed cartridges.
User’s guide – Page 95
…icon for X6100 series, then clicka printer. 3 Make sure there is no check next to: page 97 page 98 page 99 page 99 page 95 page 99Page 100 Page 104 Website Page 105 Page 105 Page 105Document does not print• Make sure the capsules are installed correctly. Problem: document…
User’s guide – Page 96
… Computer. • Reduce the print quality (Fast Normal and print faster than normal text.• Consider purchasing additional random access memory (RAM) for inkjet printers. • Do not load plain paper in the All-In-One. • Never load too much paper into the All-In-One.To help…
