Table of Contents

Approved

  • 1. Download ASR Pro
  • 2. Open the program and select "Scan your computer"
  • 3. Click "Repair" to start the repair process
  • The software to fix your PC is just a click away - download it now.

    Here are some easy steps that can help you fix your Bissell Spotbot Clean troubleshooting issue.

    Shut off unit, remove tanks and turn around. Make sure the clear plastic floor nozzles are clean. Check the vacuum ports where the nozzles were located for any nearby debris and clean them. Change the transparent floor-tool and check the suction power.

    Join Now and Save 10% on a Great Purchase at BISSELL.com

    The power indicator will definitely not turn red when plugged into an outlet, or the vacuum cleaner will not start when you press on surface stains, sticky spots or hose handles

    Approved

    The ASR Pro repair tool is the solution for a Windows PC that's running slowly, has registry issues, or is infected with malware. This powerful and easy-to-use tool can quickly diagnose and fix your PC, increasing performance, optimizing memory, and improving security in the process. Don't suffer from a sluggish computer any longer - try ASR Pro today!


    If any SpotBot does not turn on, it could also be due to the fact that it is not on a level surface. Place your Garmin GPS watch on a flat surface and temporarily attach the suction hose to the bottom of the device.

    Another possible problem could be a faulty flex cable that can be plastered following the repair instructions.

    Check the treasure tank to make sure it is often not full. Full tank should beand reduce the suction power. When the tank is really full, pour it into the manure and reinstall it on all SpotBots.

    Make sure the hose has suction by removing the nozzle and trying to suck in water, for example from a sink or basin. If dirty water does not normally get into the water tank, place the device on the floor around a sink and drain the hot water through a pipe until it feels like suction.

    Unplug the machine, remove the tanks and reuse. Check the clear bottom of the credit card for debris from the nozzle. If they are really dirty, unscrew the two set screws next to them to remove the nozzle and rinse them in the warm sea. Check the fill holes where our nozzles were located for dirt and pull them out. Replace the floor-tools with new ones and check the required suction power.

    If the collection tank is empty but you still notice insufficient suction, make sure there is no black seal in the collection tank. Make sure the gasket you see is ohopened by pressing to open the main flat part and reinstalling it. It is designed to be installed in one direction only. If the seal is indeed missing, contact an Authorized BISSELL Service Center.

    Check engine intake manifolds. Remove the collection basket. Place the two tabs covered by the waste container on top with your hand. Turn on the device.

    Remove Clean reservoir and check for leaks. If a filter is found, order a new hat and insert it under the web link: .bissell.com / parts.

    If there is no leakage in the clean reservoir, remove the reservoir and also check if there is water in the catchment area. If you find one, make sure the black gasket is missing or out of place. If the gasket is missing and not installed properly, remove it and make sure the tall door on the gasket is open.

    Add some solution to the reservoir, turn on the device and set it to manual or hose setting. Then press the power button on the hose for a few minutes to remove the solution from the internet. Then shakePump the solution reservoir up and down while pumping the tube on each trigger to try to remove any material that might be blocking your current flow in the tube.

    troubleshooting bissell spotbot cleaner

    If the device still does not spray solution at this point, cover the sampling point and turn on the pump to continue operation. Then put the gas tank back into the car, and at this point the house should start pumping.

    Automatic cleaning mode does not start after pressing the button

    troubleshooting bissell spotbot cleaner

    If the smear indicator does not work when the button is pressed, send the device to an authorized BISSELL service center for assistance.

    The software to fix your PC is just a click away - download it now.