Table of Contents

Approved

  • 1. Download ASR Pro
  • 2. Open the program and select "Scan your computer"
  • 3. Click "Repair" to start the repair process
  • The software to fix your PC is just a click away - download it now.

    Over the past few days, some of our readers have come across the well-known Windows 2000 error message 0xc0000005. This problem can arise for several reasons. We’ll look at them now.

    Stop 0x0000001E or KMODE_EXCEPTION_NOT_HANDLED

    This stop message, also known as Stop 0x1E, indicates that the kernel-mode agent attempted to execute an additional invalid instruction from an unknown processor. This Drejer Sig error is a default error handler that catches errors unrelated to several other specific error handlers.

    The four specifications listed in the post are limited in the order in which they appear:

    1. Exception code did not work for
    2. Address where the exception
    3. Parameter 0 of the exception
    4. Parameter 1 of the exception

    For example:
    STOP: 0x0000001E (0xC0000005, 0x00000000, 0xfca733b9, 0x00000000)
    KMODE_EXCEPTION_NOT_HANDLED 0xC0000005 from 0xFCA733B9 (0x0, 0x0) FCA733BA70000A address leads to base FCA733BA70000A

    The first parameter is a late 90s Windows error code, identified by our error type, which occurred in the new Microsoft® Windows Device 2000 Driver Development Kit (DDK) file, Ntstatus.h. Most often, as confirmed above, this is 0xC0000005, which means that your current program was trying to access this space that was not allocated to it. This is usually caused bya NULL pointer (that is, 0x00000000) that successfully passed the parameters to the function. It is difficult to determine if this was a process based on only four parameters, as it could simply mean that it was not the first or not the next parameter to this function. See the description of parameters three, four and below for clarity.

    The second parameter defines the discussion of the In module in which my error occurred. Often home (0xFCA733B9 in the example above) indicates that one driver or piece of hardware is pointing to faulty hardware, which is usually in third place in a hardware stop message. Always pay attention to this address and the reference date for the new driver image it contains.

    The previous two parameters are different depending on whether this exception has occurred. You can usually find a description of all the options that are usually included in Ntstatus.h along with the name of the code error. If the error code has low parameters, the last two parameters actually show up as 0x00000000.

    Solve the problem

    Faulty device driver or systemth service. In addition, a faulty device or biker system service could be the cause of this error. Hardware issues such as memory conflicts and interrupt lookup (IRQ) conflicts can also create this unique error.

    If a driver is listed by name in the shutdown message, uninstall that driver. Deactivate and remove any recently added drivers or tools. If our error occurs during boot, please restart your computer in Safe Mode so you can rename or delete the file. If you are using the driver as part of the Safe Mode boot process, you must use the Recovery Console to configure your computer to access the file. For more information about Safe Mode and the Recovery Console, see Troubleshooting and Policy Tools in the Windows 2000 Professional Resource Kit.

    If the issue is frequently related to Win32k.sys, a third-party remote control program may be the source of the issue. If collation software is installed, the service can be uninstalled by running installation from to Using the Recovery Console and skipping the interfering system service.

    Check my syslog in Event Viewer as I see additional error messages that allow me to find the device or driver causing 0x1E to exit. Disabling the BIOS cache can also fix the error. You will also need to run hardware diagnostics, especially a dedicated storage scanner provided by your computer manufacturer. Refer to your computer’s instruction manual for details on these experiments.

    One such troubleshooting method is exception code 0x80000003. This error indicates that a breakpoint or hardcoded assertion was reached, but the entire system was started with each / NODEBUG switch. This problem is rare. If this happens repeatedly, make sure that a specific kernel debugger is connected and that the system was started with the / DEBUG switch.
    An error generating the following message may occur after a recent restart while installing Windows 2000, or possibly after the installation is complete. Possible cause of the error is insufficient disk space and incompatibility of the system BIOS. If you are having installation problems in Windows 2000 and there is no disk space, reduce the number of files on the target hard disk. Make sure you check unnecessary temporary facts, internet cache files, application backup folders and .chk files that contain manually saved file snippets from scanned images and delete them. In addition to having more free space for assembly, you can also use a different hard drive. BIOS problems can be resolved by updating the system BIOS.

    windows 2000 0xc0000005

    For more troubleshooting information about specific 0x1E stop messages, see the Microsoft Knowledge Base link using keywords and key phrases and winnt 0x0000001E.

    Reasons for Application Shutdown in User Mode for 0x1E
    Applications that typically assign a non-release system descriptor cause the operating system to shutdown with code 0x1e. Programmers are often nThey call it “leak treatment”.

    Approved

    The ASR Pro repair tool is the solution for a Windows PC that's running slowly, has registry issues, or is infected with malware. This powerful and easy-to-use tool can quickly diagnose and fix your PC, increasing performance, optimizing memory, and improving security in the process. Don't suffer from a sluggish computer any longer - try ASR Pro today!


    To verify that an application is causing my problem, you can use the Performance Checker to collect information about the programs you are viewing. If it will be done with a second machine connected over the network.
    However, before attempting this tutorial, you need to examine the site trace to see what the stack is based on. If it’s not NTOSKRNL, don’t try it, as it probably isn’t a problem. This is because descriptors are usually objects that relate to the operation of the computer’s kernel. Not from device drivers, and there may be other code snippets related to Ring 0.

    Pseudo-user application mode causing 0x1E to exit.

    Much of the knowledge about user-mode applications uses “ring 0” code that can perform a specific function. Here is a typical, but not necessarily exhaustive, index of these types of applications:

    The Remote Checker provides a remote interface to the Cthe system console on this computer. They are usually used to prevent your administrators from physically having to be in the computer room.

    This software interacts with the Graphics Device Interface (GDI), which is an integral part of Windows systems.

    Here is an overview of some of the known challenges with educational software:
    http://support.microsoft.com/SUPPORT/KB/ARTICLES/Q260/8 …
    http: // support .microsoft.com / support / kb / article / Q196 / 2 …
    http://support.microsoft.com/support/kb/articles/Q168/9 …

    Antivirus software as well as the agent-based backup class of applications usually install a so-called filter driver. This is usually a device driver that goes into a call to bind a new system service between the application and the underlying operating system service.

    In some cases, for these two classes of software, it sits somewhere between using the filesystem and using the filesystem.

    The function that appears in this case is to intercept system Calls and scanning of the called document object for viruses using the disk subsystem.

    windows 2000 0xc0000005

    In the current case of backup agents, they usually serve as an intermediary between a particular application that can leave the working file open, and, no doubt, backing up the agent itself so that the image can always be kept open independently.

    I probably do not claim authorship of all parts of this document. I have compiled the post in this document to meet almost any need I had while working as an escalation engineer at Microsoft. Was this an easy way to get all the information you needed often?

    Most of this document is taken from the current Windows 2000 Professional Resource Kit. It is not intended to replace data. You can read most of them on the Internet at:
    http://www.microsoft.com/windows2000/techinfo/reskit/en …
    You can find the Microsoft Knowledge Base at:
    http : / /search.support.microsoft.com/kb/c.asp?FR=0&SD=MS …

    The software to fix your PC is just a click away - download it now.