Home News How To Fix Hard Disk Read Error? Press Ctrl Or Alt. Suppress...

How To Fix Hard Disk Read Error? Press Ctrl Or Alt. Suppress Restart



Hope this blog post can help you if you encounter a hard drive read error. Press Ctrl, Alt, Delete, Restart. Press Ctrl Alt Del to restart. “He was more interested in the data on the disk and feared that the hard disk would fail. …Unplug your USB or DVD drive. …Reset / update BIOS. …Rebuild MBR and fix startup. …Check your hard drive cables. …Check your RAM. …Try the player on a different computer. …Conclusion:



Troubleshooting An error occurred while reading the hard drive in Windows XP, Windows Vista, Windows 7 and Windows 8.

Why Is There An Error Reading From The Hard Disk?

The actual cause of this error varies from computer to computer, from hardware problems to software problems. This section lists the most common causes of hard drive read errors.

Computer hard drive is failing

In most cases, a failure to read from a hard drive indicates damage. If the boot sector on the hard disk is damaged or there are bad sectors on the system partition, the system freezes with errors.

No bootable hard drive

Sometimes a hard drive read error before booting occurs because the computer is reading the wrong boot hard drive. If there is no boot disk, or the boot disk is not configured correctly, the system will not boot normally.

Damaged hard drive cable

An IDE cable is a large piece of twisted cable in your computer case that is responsible for connectingPutting the hard drive to the motherboard. Sometimes, incorrect or loose IDE cables can cause hard disk read or write errors.

BIOS setup issue

In rare cases, a hard disk read error occurs due to incorrect BIOS settings. If any BIOS updates are available, they should be updated carefully.

MBR corrupted

Another common cause is incorrect or invalid setup of the Master Boot Recorder. Moreover, corrupted MBR configuration can be caused by virus attack, power outage, bad sectors, etc. In addition, incorrectly configured partition table can cause this problem.

Sudden power failure

error reading disk press ctrl alt delete restart

Incorrect system shutdown can damage your computer’s files and hard drives. This usually happens when the power is accidentally turned off or the system needs to be turned off to terminate a program that is not responding. After a computer crash, Windows checks the file system and hard drive at startup to check and fix problem files.

Operating system problem

An incomplete or incorrect installation of Windows also leads to this problem; For example, if DLL files are missing on the system or some system registry files are damaged.

6. Rebuild MBR

Apart from BIOS, it is likely that the MBR is also the cause of this error. The Master Boot Record (MBR) is the portion of the hard disk that contains the Master Boot Code, digital signature, and partition table. Hence, the MBR is also involved in the startup process. If any problems are related, it will cause startup errors. In this case, you need to restore the MBR.

You can do this using third-party software or from your Windows installation disc. However, since this procedure is a little complicated, it is recommended that you use an installation disc.



What to do if disk read error occurred?

In Windows 8, if “An error occurred while reading the hard drive”, run the same Bootrec utility:Boot from the installation media.Click Repair your computer or press R.Click Troubleshoot.Click more options.Click Command Prompt.Enter the commands and press Enter after each: bootrec / rebuildbcd bootrec / fixmbr bootrec / fixboot.More Articles …

What is Disc Read Error?

Hard disk reading error is a common error that we may encounter. This error means that Windows has detected a problem with the hard drive or a hard drive read error. … when you press Ctrl Alt Del to restart your computer, you still get the same error, unable to start Windows.

Can’t get past Ctrl Alt Delete screen?

What if my computer freezes at CTRL ALT DEL?Reset your graphics card / graphics card driver.Perform a hard reset.Perform startup repairs.Disable quick start / start.15 September 2020