Home News


Start Windows 10 desktop and launch Device Manager by pressing Windows Key X and clicking Device Manager. Expand DVD / CD-ROM drives, right-click the specified optical drive and select Remove. Close Device Manager and restart your computer. Windows 10 will recognize the drive and reinstall it.



  1. DVD / CD-ROM Missing In Device Manager

  2. Can you check if the drive is in BIOS? I think so.

    If my guess is correct, here are some possible solutions, some of which you have already tried:
    [FIX] The optical drive (CD / DVD) icon does not appear on my computer window – AskVG

    Note that some of these tips include editing the Windows registry. Changing the registry incorrectly can significantly damage your computer. Before making any changes, make sure you have a system restore point and back up any values ​​you change.

  3. Nighthawk Avatar

    Hello Appocalipse Welcome to ten forums!

    A tip that anyone who works best can give you is to replace your update installation with a new 10 installation! If you don’t know right away that something went wrong with the update, everything you come across will come later. 10 updates sometimes seem to be delayed!

    As Yorgi pointed out to a number of things, registry errors, in particular, can actually wipe out any Windows installation, while in half of the cases, problems are associated with the constant need to see updates installed. a level that could easily look like a “faulty” H … “!

    You can try using the System File Checker option by typing sfc / scannow at the command line, or schedule the Disk Checker to run by right-clicking the C drive tab Open Tools, then click the Error Checking button. If the update does not work, you may see hard disk errors or some files may be missing if they are not just corrupted and causing these problems.

  4. Avatar Dch48s

    One fix that worked for many is to remove the channel 0 and channel 1 entries under the IDE ATA / Atapi Controllers section in Device Manager by deleting them. Then restart your computer. Both items will be reinstalled and you should be able to see your drive.

  5. One fix that worked for many is to remove the entries for channel 0 and channel 1 in Device Manager under IDE ATA / Atapi Controllers by deleting them. Then restart your computer. Both items will be reinstalled and you should be able to see your drive.


    Deleted the entries, as I said, restarted, and the disk became available in “My Computer”, “Device Manager” and “Controle disks “.

    Now I’ll try to install the hard drive again! When I’m done, I think I’ll reformat everything and do a clean install of Windows 10 to fix other issues.

    Thanks to everyone who responded to the help and many thanks to Dch48 for the solution!

  6. Avatar Dch48s

    Welcome. I’m glad it worked for you.

  7. Nighthawk Avatar

    You can also see this with other hardware, such as network adapters, if for some reason you are unable to connect. After the system restarts, the device detects a new Windows detection, during which a new set of drivers is installed, allowing it again. When you want something to disappear, for example, get angry at thechoke a floppy disk? Just go to the floppy disk controller and turn off whatever you find there!

  8. DVD / CD ROM Does Not Appear In Device Manager

    Please. I’m glad it worked for you.

    Hello Dch48, I hope you are doing well!
    Well I have the same problem with my Dell 5558, sometimes the DVD is visible and sometimes not. I am also looking for channel 0 and channel 1 according to your IDE ATA / Atapi address, but I didn’t find what I found only in the Intel (R) 9 series Chipset Family “.

    Can you find out what the problem is?

  9. Nighthawk Avatar

    He will not be able to answer your answer.

    In most cases, your Dell model’s optical drive looks like a sata drive without ide support and canIt is not easy to create dust and dirt or simply disconnect the cable if the drive itself is not a problem. In the case of optical drives, they are often no longer visible or readable if the inserted hard drive cannot be opened. The reader is about to come out!

    In the basic version, I actually had the first DVD drive, which was an LG SATA drive, right after I put it back in! I actually installed an identical pair of drives and then just replaced them with a pair of MSI IDE DVD drives that ended up having problems and started using a pair of currently used MSI Sata drives. Assuming one of them was a little worn out, I quickly bought one on Amazon one day and when it arrived I found the first drive was working like new! I went in and just unplug and plug the drive back in to make sure the connector is secure.

    Indicates not the need to know which channel the drive is on, but whether the problem is a drive, a cable, or even a port. Poor connections can result from wear and tear if dust and dirt do not accumulate over time.that will lead to a violation of the integrity or lack of electrical contact between the cable and the connection! The design pushes a wedge out of the dirt where it might not be the positive and ground pins, but the data pins that are not in full contact.

  10. This problem was solved for me:

    If the above method doesn’t work for you, you can add the DWORD directly to the registry by running the following command from the command line:

    reg.exe add “HKLM System CurrentControlSet Services atapi Controller0” / f / v EnumDevice1 / t REG_DWORD / d 0x00000001

    Make sure you are opening Command Prompt as administrator.

    no disk drives in device manager



    Why is my hard drive not showing up in disk management?

    If you check the hard drive in Disk Management, it is marked “Unknown, uninitialized” and does not appear on the system. If your computer cannot recognize the connected hard drive, the hard drive driver may be out of date or incompatible with the operating system. The hard drive is not enabled in BIOS or Device Manager.

    Can see hard drive in Device Manager but not in disk management?

    Select the hard drive shown in Device Manager but not Disk Management and right-click it. Select Format Volume u2026. Now reset the file system from FAT / RAW to NTFS. Recover the file system of the drive and set a new drive letter for it so that it can be found using Disk Management in Windows 10.