Home News Best Way To Fix A Disconnected Boot Volume

Best Way To Fix A Disconnected Boot Volume

25
0

 

The “Unmountable Boot Volume” error message appears for various reasons. This could be due to a corrupted file system that cannot be mounted, or because the basic BIOS (Input / Output) settings are configured to use the fastest UDMA modes.

 

 

“Boot Volume” is the partition on your hard drive where boot files and the Windows system are stored. If you receive an “Unmountable Boot Volume” error, you will be unable to access Windows and will hang with a blue screen error (BSoD).

Therefore, you cannot fix this error, like other less serious problems. Fortunately, there are several methods you can use to fix this problem, as described below.

What Causes The Undeployable Boot Volume Error?

An inoperative boot volume error can be caused by the following:

  • File corruption on hard disk

  • Damaged system files

  • Damaged RAM

  • Damaged hard drive

  • Incorrectly configured BIOS (this is rare unless you changed the BIOS yourself)

  • unmountable boot volume can

    Critical Windows Update

Fix 1 – Chkdsk

  1. Boot your computer from a Windows 10 DVD or USB drive. If you don’t have a Windows 10 media, visit this page and follow the steps to create one using the Media Creation Tool.
  2. If you are using a DVD or USB device, select the “Repair your computer” option in the lower left corner.
  3. Select Command Prompt.
  4. At the command prompt, type and press Enter:
    chkdsk / rc:
    If your boot drive is a letter other than “C” Replace “c:” with the letter of the boot drive drive you are using.
  5. When prompted to check the hard drive at the next system restart, select Yes for Yes.
  6. Reboot the system. Wait while chkdsk checks your disk for errors. It can take some time.

Fix 2 – Fix Master Boot Record

  1. Boot your computer from a Windows 10 DVD or USB drive. If you don’t have Windows 10 media, visit this page and follow the instructions to create one.
  2. If you are using a DVD or USB device, select the “Repair your computer” option in the lower left corner.
  3. Select Command Prompt.
  4. At the command prompt, type and press Enter:
    bootrec / fixboot
  5. Reboot the system. Wait while chkdsk checks your diskfor errors. It can take some time.

Fix 3 – Automatic Repair

  1. Boot your computer from a Windows 10 DVD or USB drive. If you don’t have Windows 10 media, visit this page and follow the instructions to create one.
  2. If you are using a DVD or USB device, select the “Repair your computer” option in the lower left corner.
  3. Select Troubleshoot> Advanced Options> Automatic Repair> Next.
  4. Select the operating system you want to recover.
  5. Please wait while the utility tries to recover files.

If none of these steps worked, you may have a faulty hard drive that needs to be replaced.

 

 

Top 6 Solutions to Unmountable Boot Volume Windows 10

Restart your computer.Take advantage of Windows 10 Automatic Repair.Rebuild the MBR.Check your hard drive.Run the System File Checker.Reinstall Windows 10.

Boot the Unbootable: 11 Steps to fix a Poorly PC – Tone’s Tech Tips

Hold down the power button. Check current.Remove the battery.Disconnect peripheral devices.Reboot BIOS.What to do with the error codeWindows 10 recovery options – Start recovery. – System Restore. – Go back to the previous version. …Safe mode. – Disable services. – Disable startup programs. …We invite you to help.

Unmountable boot volume in Windows XP – Computer Hope

To fix this problem, start the Recovery Console.In the Recovery Console, enter chkdsk / p to see if the disk is faulty or marked dirty. …If no errors are found on the hard drive after this check, restart your computer.