In this user guide, we are going to identify some of the possible causes that might cause the USB drive recovery tool to run, and then suggest possible solutions that you can try to resolve.
The HP USB Format Tool provides a simple interface for easily recovering damaged flash drives by formatting the USB drive. The whole process of using this tool requires only 4 steps, which will allow you to manage all the steps in one interface.
USB drives can be damaged or damaged for various reasons. Luckily, you can get your USB drive repaired for free. Windows chkdsk and Windows Disk Error Checker can fix errors on your hard drive from the command line. Then you can use EaseUS data recovery software to recover data from faulty USB drive without losing files.
Causes And Symptoms Of Damaged USB Flash Drive (SanDisk)
Before attempting to repair damaged USB drives, it is advised to investigate the root causes of this problem and its main symptoms in order to reduce future storage problems.
1. What Causes Damage to a SanDisk USB Drive?
-
Disconnect the USB storage device from your computer without selecting the Safely Remove Hardware / Remove Media option.
-
The USB stick is infected with a virus or malware.
-
There are bad sectors on the USB stick.
-
The USB or MBR partition table is corrupted.
Suddenly remove the USB stick while data is being written.
2. The main symptoms can be found:
“SanDisk USB Drive Not Formatting: When you connect a SanDisk USB drive to your computer, you need to format it before use.” Do you want to format it now? Â “is displayed.
“SanDisk USB Drive Shows Read Only Error: If you see the error message“ The hard drive is write protected ”, you cannot access, copy, or move data stored on the SanDisk USB drive. …
SanDisk USB Drive displays RAW file system: If the USB drive is in the RAW file system and not in the standard or recognized Windows file system, you will lose access to all data on it. SanDisk USB Flash Drives.
Apart from the three most common symptoms, you may also receive an error message: USB device not recognized. No matter your situation, SanDisk USB Drive Repair Tool can save you a lot of labor to get your damaged USB drive back into working condition.
9 Tools To Recover USB Drives In Windows 10/8/7
Before repairing, we strongly recommendIf necessary, we can restore data from a damaged USB drive.
Note. Almost all USB recovery programs should be run with administrator rights. Restoring the USB drive will erase your data. Therefore, we strongly recommend that you restore your important files before doing any repair work.
Here is a list of the best USB recovery tools that will hopefully find at least one that will work with your damaged flash drive.
# 1 Error Checking – Recovering a damaged USB drive with the error checking tools provided by Windows
As the best utility for recovering USB drives, Windows has a built-in utility called Error Check that is effective when your flash drive has errors (empty, unprocessed format, unsupported file system, 0 bytes, wrong format) , format before use, not available …)
Here’s how to get started repairing your USB stick.
Step 1. Connect the USB stick to your computer / laptop with Windows 10/8/7
Step 2. Double click “This PC” -> right click your USB drive -> Properties
Right Click on USB Key Properties
If there was no space under This PC, go to Device Manager and right click -> Properties
In Device Manager, right-click the properties of the USB storage device.
Tips: How do I open Disk Manager? Open cmd and enter “devmgmt.msc” in the Run box. Just type “Device Manager” in the Windows 10 search column, or right-click “This PC” -> “Manage” -> “Device Manager”. Right Click Your USB Key -> Properties
Step 3. Go to Tooltip -> Error Checking -> Checking
Repair your flash drive in Windows 10 using the Error Checker
If you are using other Windows operating systems than Windows 10, you may see another window as shown in the following image.
Use Error Checker to repair a damaged USB drive in Windows XP
Step 4. Confirm the selected operations and start recovery when a window appears asking you to select the available options.
Watch the following video to learn how to get started troubleshooting flash drive problems.
# 2 Freeware Partition Resizer Free – Bad Block Recovery, Error Fix, USB Drive Formatting
Step 1. Download this free software and connect the USB stick to the Windows computer that has this tool installed.
Note. This free software has a portable version that can be used directly from a removable device. You can right click on the executable and then select the option -> Run as administrator and then start using it.
Step 2. Open this free USB drive recovery software and right clickon USB drive -> Check partition
Select the two available options and confirm the change to start recovering the removable drive.
Select “Fix All Found Errors” or “Attempt to Fix Bad Sectors” on the USB drive.
Step 4. Modify so that the above repairs are done on the damaged USB drive.
Note: you can go back to your USB drive and see if it works now!
Step 5. If the above update does not work for your removable disk, try the following functional format also included in Freeware Partition Resizer.
Open this program and right click on the flash drive that is in this tool. Format
Step 6. Then select the desired fat32 / ntfs filesystem or just leave the default.
Step 7 – Then click “OK” -> “Apply” to confirm the recovery of your USB key. Then leave all the work to this free program and wait for it to complete.
Downloadfree now
# 3 MalvaStyle USB Repair – Freeware
This free USB drive repair tool has a simple interface that can be used to repair removable USB drives with a simple main interface. An administrator is required to run.
This tool fixes errors effectively. Windows cannot complete formatting the USB drive.
Download url: http://malvastyle.com/wp-content/uploads/2016/11/MalvaStyle_Setup.zip
Or you can download from this page if the above zip download url has been changed.
Video Tutorial – Using MalvaStyle USB Repair
# 4 CMD Diskpart USB Repair – Helpful Hint for USB Recovery
Here are at least two effective command lines that you can use to repair a damaged flash drive. One is CHKDSK; Two is diskpart. Command lines are a little trickier for pNon-tech savvy users. We will try to keep it simple and straightforward.
Here’s a way to run Diskpart on your computer.
- Step 1. Open cmd by pressing “Windows Symbol R” on your keyboard.
- Step 2. Enter diskpart.
- Step 3. Enter “drive list”.
- Step 4. Enter “select disk *” (you need to select the one that represents your flash drive)
- Step 5. Enter “clean”
- Step 6. Enter “create primary partition”.
- Step 6. Enter “format fs = ntfs quick” or “format fs = fat32 quick” to quickly format the ntfs / fat32 flash drive to your liking. You can also configure it as exfat however you want.
Now you can check if your USB stick is working. If that still doesn’t work, try the following methods.
# 5 Chkdsk – Fix Windows Command Prompt for Free
To use chkdsk, you must know the letter of the flash drive on your computer
You can check the drive letter by going to your computer and looking at what drive letter is displayed on the flash drive.
chkdsk h: / f – (you must replaceh with the drive letter of your own flash drive)
cmd chkdsk to recover USB drive
Video Tutorial – How To Fix Damaged USB Drives With Chkdsk