Home News Easy Way To Fix Win XP Blue Boot Screen

Easy Way To Fix Win XP Blue Boot Screen

92
0

 

In the past few days, some of our readers have encountered blue screen error when starting Win XP. There are a number of factors that can cause this problem. Now let’s talk about some of them.

Make sure all hard drive cables are securely connected before starting the computer. If new hardware is installed, try removing it and restarting your computer to see if the error persists. The chkdsk utility, available on the Windows XP installation CD, can detect and possibly repair corrupted data.

 

 

Hi,

I’m new here and in dire need of help with my Windows XP Pro computer. (I think I am using SP2, but I cannot be 100% sure; it has been a while since I have used this computer.) Sorry in advance for the length of this post; I really don’t know what to do here and have tried several things already. I would be grateful for any help you can give me.

I have not used this computer for the past few years, and several times when I recently tried to turn it on, I got a blue screen that says:

STOP: c0000221 {bad image checksum}

The ole32.dll image may be corrupted. The header checksum does not match the calculated checksum.

Upon seeing the Windows XP logo screen (the one with the boot list), I see a blue screen that blinks so quickly that I cannot read it and the computer will restart. I can get a blue screen by pressing F8 a few times when I start my computer and then choosing “Disable automatic restart on system failure” from the menu.

Ta Also from this F8 screen I tried to boot in the following modes, but the same problem occurs when it comes to the XP boot screen / logo and then the blue screen flashes and restarts:

– safe mode

– last known good configuration

– debug mode

I was directed to this page (

)https://support.microsoft.com/en-us/?Product=winxp

, but I’m a little confused, especially since I don’t have a Windows 98 or ME hard drive. (This computer came from Dell in 2000 with Windows 98, and after a year or two I installed XP on it from the Windows XP Professional CD, and in subsequent years I have used the computer with successfully and installed a service pack or two, I cannot You can find a way by following the instructions to create a Windows 98 boot disk in MS-DOS because this computer does not have version 98 installed.)

Other bulletin boards suggested switching to “Repair” mode by inserting the Windows XP installation disc. I followed the instructions here (

)http://www.michaelstevenstech.com/XPrepairinstall.htm

without backing up my data because I can’t access my operating system to do this. (I’m onI understand this is risky. I didn’t think I really had a choice.) I proceeded to step 3 as shown in the Repairing XP installation section. However, when I press Enter to start the Windows installation, I get the following message:

“The installer was unable to find the hard drives installed on your computer.

“Make sure all hard drives are turned on, properly connected to your computer, and that the hardware configuration of the hard drive is correct. This may require running a diagnostic or installation program provided by the manufacturer.

“Installation could not proceed. Press F3 to exit the installation. “

In 2000, the computer had a 20 GB hard drive. In early 2005, a friend installed a new 250GB hard drive to replace the 20GB. (20 GB were The 250 GB drive appears in the list of drives in the black and white BIOS text screen that appears at the start of each reboot. Therefore, the reader should be recognized.

So now I don’t know what to do! My only option is to get a new onehard drive, install XP on it, and then subjugate my current hard drive to retrieve files from it?

Problem 1. What Is A Blue Screen Error?

When Windows encounters certain situations, it pauses and the resulting diagnostic information is displayed in white text on a blue screen. These errors cause the term blue screen or blue screen to appear.

Blue screen errors occur when:

  • Windows encounters an error that cannot be corrected without data loss.
  • Windows detects that critical operating system data has been corrupted.
  • Windows detects an irreversible hardware failure.
  • The exact display text has changed over the years from the dense information wall in Windows NT 4.0 to the relatively sparse message used in modern versions of Windows. (Figure 1)

Something went wrong and Windows shut down to avoid damaging your computer.
UNMOUNTABLE_BOOT_VOLUME
If this is the first time you see this error screen, restart your computer. р. If you see this screen again, do the following:
Make sure you have enough free space. If the stop message lists a driver, disable the driver or contact the manufacturer for driver updates. Try changing video adapters.
Check with your hardware manufacturer for BIOS updates. Disable BIOS memory options such as caching or shadow copying.
If you need to use Safe Mode to remove or disable components, restart your computer, press F8 for advanced startup options, and then select
Safe Mode.

Technical information:

*** STOP: 0x000000ED (0x80F128D0, 0xC000009C, 0x00000000, 0x00000000)

Fig. 1. An example of a blue screen error

Back to top


How To Fix Blue Screen Error In Windows XP

The first way is to start your computer in Safe Mode. This is the fastest way and works about 50% of the time. It can be accessed by pressing F8 at startup, then going to My Computer and right-clicking Disk (C 🙂 to select Properties from the expand The growing menu. On the Tools tab, run error checking and disk cleanup. If it works, congratulations! Otherwise, you will have to keep reading.

Since Safe Mode is also a last resort, you will need to use a third-party program to start your computer in a safe and clean environment. If you don’t have the option, you can get mine: Wondershare LiveBoot Boot CD / USB. This software allows you to create a bootable CD or USB drive to boot your computer in a purely safe and clean environment. Alternatively, you can use it to fix that Windows XP blue screen in a few minutes.

win xp boot blue screen

After purchasing the program, you will receive a download interface from Wondershare. Download and submit on a decent PC. In this step, follow these steps to create a bootable CD or USB drive and resolve the Windows XP blue screen error in three steps.

 

 

How do I fix Windows XP Blue Screen Unmountable boot volume?

Unused boot disk in Windows XP
  1. To fix this problem, start the Recovery Console.
  2. In the Recovery Console, enter chkdsk / p to see if the disk is faulty or marked dirty.
  3. If no errors are found on the hard drive after this check, restart your computer.

How do I fix the blue screen of death in BIOS?

How to fix Windows 10 Blue Screen of Death

?

  1. Undo the change you made.
  2. Update your BIOS.
  3. Scan your computer for viruses.
  4. Check if there is enough space left.
  5. Apply available Windows service packs and other updates.
  6. Update the drivers for your hardware.
  7. Check system memory and hard drive.
  8. System Restore.

How do I fix 0x0000007B blue screen error when installing Windows?

How to fix STOP error 0x0000007B
  1. Removing or reconfiguring the newly installed hard disk controller.
  2. Start with Last Known Good Configuration to undo associated registry and driver changes.
  3. Use System Restore to undo recent changes.