Home News
66
0

 

  1. Step 1. Download, install and run AOMEI Partition Assistant on Windows.
  2. Step 2. Choose the conversion method according to your requirements.
  3. Step 3. Select the partition you want to convert from the list of NTFS partitions.
  4. Step 4. After confirmation click “Next”.
  5. Note:

 

 

The disk file system defines the file structure on your computer. There are several filesystems you can use for your drives, each with their own advantages and disadvantages.

If you have just purchased a new computer, you can open the partition manager and format the drives with the correct file system. For example, if you want your drives to use the NTFS file system, you can select this option in the partition manager and format the drive accordingly.

Sometimes, certain tasks even require the use of a particular file system. If you are working with a new drive, you can simply format it and it may have a new filesystem. However, if a lot of data is stored on the disk, all data will be lost during the formatting process.

Do you want to change the file system of a disk without formatting it? Well there is.

Using the command line, you can easily convert the file system of one disk to another format without losing data. The guide below showshow to do it so you can do it yourself on your computer.

Changing The File System Without Formatting On Windows

To complete the task, use the command line to enter commands on your computer. The first thing to do is open a command prompt. To do this, start Run, type cmd and press Enter.

When opened, type the following command and press Enter on your keyboard:

convert drive letter: / fs: ntfs

In the above command, remember to replace drive_letter with the actual drive letter whose filesystem you want to change. The command changes the file system from FAT to NTFS. Remember there is no reverse gear. After running this command, you will not be able to revert to FAT or FAT32 without data loss.

Editing The File System With Software

If you don’t want to use the command line to execute commands and change the file system and are looking for an easier way to change the file system. I will recommend a free partition manager for you. AboutThe downside is that you have to put up with data loss.

Before you start, keep in mind that no matter what precautions you take, sometimes you can lose data. There could be several reasons for this. The best way to solve this problem is to use a data recovery software. Fortunately, there are tons of such software out there, and one of them is 4DDiG for Windows Data Recovery.

All you have to do is download the software to your computer and scan the disks to see if the lost files can be recovered. After scanning your drives, it will show you what it can repair for you.

Now that you know how to recover data after data loss, let’s see how to use the application to change the file system of a disk without formatting it.

Proceed to download the Partitioning Tool. Open the program and select Format. Select the drive you want to format. In this window, you can change the file system for this diska.

We hope this guide helps you change the file system of your drive without formatting it on your Windows computer.

Why Convert FAT To NTFS?

Many ordinary people do not know how to choose the right filesystem for their storage devices. If you are facing the same problem, if you do not know NTFS or FAT32 for external hard drive, USB or SD card, read on and you will find out.

Method 1. Convert RAW To NTFS Via CMD (no Formatting)

If you don’t want to format the RAW drive, you can convert RAW to NTFS using CMD. To preserve RAW files before formatting, first recover the data from the RAW disk. You can convert RAW to NTFS without CMD formatting using the step by step instructions below.

Step 1. Click Start, type the following: cmd and press Enter.

Step 2. Right click on cmd, then select “Run as administrator”.

Step 3. Type diskpart and press Enter.

WStep 4. Type H: / FS: NTFS and press Enter. (H is the drive letter of your RAW storage device.)

Now your RAW will recover RAW section without formatting via CMD. However, CMD usually does not work and you receive the message “CHKDSK is not available for RAW disks”. If so, don’t be discouraged, read on to change RAW to NTFS without data loss.

Method 2: Convert RAW To NTFS Using Disk Management

After recovering lost data, you can now format RAW to NTFS. Follow the steps below to convert RAW partition to NTFS.

Step 1: Open This PC or Disk Management, right-click the RAW partition or drive, and select Format.

Step 2. Specify the volume name, file system (NTFS) and allocation unit size. The default format option is Quick Format. Then click OK to start the process.

windows 7 change file system without formatting

Step 3. After reformatting, you can access the RAW file system partition or disk and use them as usual.

Method 3. Convert RAW To NTFS With EaseUS Partition Master

Another way to change RAW to NTFS is to use EaseUS Partition Master. With this partition manager software, you can format RAW to NTFS easily. You can also cancel the operation before clicking the Execute button. This software also has many strengths that can help you a lot.

  • Transfer the operating system to an SSD or hard drive.
  • Partitioning a hard drive in Windows 10/8/7
  • Increase your C storage space with simple mouse clicks
  • Erase the hard drive or delete a partition.

How to Convert RAW to NTFS with EaseUS Partition Master:

If you need to format or convert an external RAW storage device such as SD card, USB stick or external hard drive, please connect it to your computer first.

 

 

How do I change a RAW file system to NTFS without formatting?

How to convert RAW to NTFS without formatting
  1. Find and scan your RAW hard drive.
  2. Find and view the data found on the RAW disc.
  3. Recover and save data from RAW disk.
  4. Open This PC (Windows 10), right-click the RAW drive / partition and select Format.
  5. Select the NTFS file system and adjust other options as needed.
  6. Click Start> OK.

How do I change my USB format to fat32 without formatting?

How to Convert USB Drive Format from NTFS to FAT32?

  1. Right-click [Computer], then click [Manage].
  2. Click [Disk Management]
  3. Select USB storage, right-click and select [Format]. Click the [Yes] button.
  4. Name the drive and select the [FAT32] file system.
  5. Click OK]. Click OK].
  6. You will find the FAT32 format.

How do I fix a raw USB without formatting?

How to Convert USB Drive Format from NTFS to FAT32?

  1. Right-click [Computer], then click [Manage].
  2. Click [Disk Management]
  3. Select USB storage, right-click and select [Format]. Click the [Yes] button.
  4. Name the drive and select the [FAT32] file system.
  5. Click OK]. Click OK].
  6. You will find the FAT32 format.