Home News Do You Have A Windows 7 Recovery Drive With USB Problems?

Do You Have A Windows 7 Recovery Drive With USB Problems?



Over the past few days, some of our readers have told us that they are facing a Windows 7 recovery disc in Windows 7.



  1. Open “Backup and Restore” by clicking the “Start” button, then “Control Panel”, “System and Maintenance” and then “Backup and Restore”.

  2. In the left pane, click Create System Repair Disc and follow the instructions. If you are prompted for an administrator password or confirmation, enter the password or provide confirmation.

Note. Â If you are prompted to install a Windows installation CD, the files required to create a system recovery CD cannot be found on your computer. Insert the Windows 7 installation CD

  1. Insert the System Recovery CD into your CD or DVD drive.

  2. Restart your computer using the computer’s power button.

  3. Whenand prompts you to press any key to start the computer from the system recovery CD.

    • If your computer is not configured to boot from CD or DVD, check the information that came with your computer. You may need to change your computer’s BIOS settings.

  4. windows 7 recovery disk on usb

    Select your language settings and click Next.

  5. Select a recovery option and click Next.

Tip. ez Print these instructions and keep them in a safe place with the System Recovery CD.

  1. Turn on your computer, insert your Windows 7 installation CD or USB drive, and turn off your computer.

  2. Restart your computer.

  3. When prompted, press any key and follow the instructions on the screen.

  4. When the Install Windows page opens, click Installь now “to begin the installation process, or click” Repair your computer “to access the system recovery options.

  5. Follow the instructions.

If you do not see the Install Windows page and are not prompted to press a key, you may need to indicate that your computer uses its DVD drive or USB drive as the first boot device. To do this, you need to change the settings in the computer BIOS (Basic Input / Output System).

Note. La Most new computers can boot from a USB device, but some older computers may not have this feature. For more information, see the documentation that came with your computer or the manufacturer’s website.

Before changing BIOS settings, check the information that came with your computer, or visit the computer manufacturer’s website. Some methods for accessing the BIOS and changing settings may differ depending on your computer manufacturer or youyou can select the boot device used by your computer without changing the BIOS settings.

Warning. Be careful when changing BIOS settings. The BIOS interface is designed for advanced users, and you can change a setting that may prevent your computer from starting correctly.

  1. Turn on your computer, insert your Windows 7 installation CD or USB drive, and restart your computer.

  2. New computers often display a boot menu (or boot menu). From the boot menu, select “BIOS Setup” or “BIOS Settings” or something similar.

    The procedures differ depending on the BIOS manufacturer. Typically, you should press a key (such as F2, F12, Delete, Esc) or key combination immediately after turning on the computer, but before Windows starts. If you see the Windows logo, you will have to try again by waiting for the prompt to sign in to Windows and then shutting down and restarting your computer.

  3. The BIOS setup screen appears. On the BIOS setup screen, select Boot Order or somethinglike that. Boot order options can also be specified in the Advanced Settings section or something similar.

  4. Select DVD drive or USB drive as the first boot device. (The USB drive might be listed under “Removable storage or something similar.)

  5. Save settings changes and exit BIOS.

  6. Restart your computer and start Windows 7 as described above from the installation CD or USB drive.

What If There Is No Winre.wim File In The Recovery Folder?

In some situations, this issue can occur if the Winre.wim file is not found in the recovery folder. If you are out of luck with this, the easiest way to fix it is to copy the Winre.wim file from another Windows 7 computer that has it. However, you must be careful using the Winre.wim file from Windows 7 and using the same architecture as yours. If you plan to use a bootable USB drive on a Windows 7 32-bit device, be sure to copy Winre.wim file from another 32-bit Windows 7 device. If you are using it on a 64-bit device, copy Winre.wim from a 64-bit Windows 7 computer.

If you don’t have access to another Windows 7 device and can’t copy Winre.wim from it, another known solution is to use the Windows 7 installation DVD or USB key. Insert the Windows 7 installation DVD or USB drive into your computer. Then start Windows Explorer and open the source folder from the installation DVD or USB drive. There should be a file named Install.wim inside it.

Create a new folder on your computer and give it a name of your choice. For example, we created a folder called temp on drive C, where Windows 7 is also installed.

Now open a command prompt as administrator and enter the following command: DISM / get-wiminfo /wimfile:D:sourcesinstall.wim. Please note that D is the letter assigned to the DVD or USB key when installing Windows 7. Replace it with the letter that is directly on your computer. You should get a list of the Windows 7 installation versions available on the DVD or USB stick. Make a note of the Windows 7 installation index number from corresponding to yours. As mentioned earlier, it is important that you use the same architecture – 32-bit or 64-bit. If the Windows 7 installation DVD or USB drive contains different versions of the operating system, such as B. Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 Professional, or Windows 7 Ultimate, you can choose any of them, because they all have one and the same Winre.wim file.

You should still be at the command line, where you should now enter the following command: DISM / Mount-Wim / WimFile: D: sourcesinstall.wim / index: 1 / MountDir: C: temp / readonly. Please note that you need to adapt this command to your environment:

  • D: sourcesinstall.wim is the path where install.wim is located on your DVD or USB media when installing Windows 7.
  • / index: 1 is the index number you selected in the previous command;
  • C: temp is the path to the folder you created in the beginning. In our case, this is a temporary folder on the C drive.

Your computer should now place the install.wim file in a temporary folder. This is a large file, over 2 GB, so editing will take at least a few seconds. It also depends on the speed of your computer and the speed ability to read data from a USB storage device / DVD. When this is done, you should receive a message that the process completed successfully.

Close Command Prompt and start Windows Explorer. Go to the temporary folder or the one you created. It should contain all the standard Windows 7 folders: Programs, Users and Windows.

Navigate to “C: tempWindowsSystem32Recovery”. You will always find the winre.wim file here. Copy it and follow the other steps in this tutorial.



Can I download a Windows 7 recovery disk?

Windows 7 system recovery discsMost Windows laptops do not come with operating system disks — they have a recovery partition on the hard drive. … If your system is no longer working and you now need a System Restore CD, you can download one of the following: Windows 7 64-bit System Repair Disc. April 16, 2015

How do I make a Windows 7 recovery disk from USB?

Choose your DVD player. Insert a blank DVD into your DVD drive and click the button to create a bootable DVD. Wait for the recording to complete. When the Windows 7 recovery DVD is ready, you are now ready to create a Windows 7 recovery USB drive.

Can I create system repair disc on USB?

To create a USB recovery tool, you first need to create a recovery CD. This can be done in two ways. … Click “Start”, type “create a system recovery disc” in the search box and insert a blank disc. When you start the process, your disc will be burned, which can take several minutes. July 31, 2011