If you see an ahci BIOS setting, this blog post might help.
Turn off your system.Power on most of the system and press the F2 key to enter BIOS.Go to system or hardware setup (usually BIOS specific).Look for AHCI or SATA mode.Enable AHCI or set it to AHCI in SATA mode.Close the BIOS backup.AHCI activated.
AHCI is a new storage mode in which the computer can take full advantage of SATA, such as faster hardware exchange with SSDs and HDDs (Native Command Queuing Technology, or NCQ), and hot swapping of heavy hard drives.
What Is AHCI Mode For BIOS?
AHCI is a new drive mode in which the computer will certainly take advantage of SATA, first of all, much better data exchange speed with SSD and HDD (Native Command tools Queuing or NCQ), as well as a nice swap of hard drives.
The difference between AHCI and IDE is that AHCI is a new user interface for transferring data between ring memory and SATA media, while IDE is an older interface that is used for transferring data between laptop or computer, desktop computer and drive. In the simple sense of the word, AHCI is much faster than IDE.
How To Boot Into The BIOS To Change The “boot Order”
You need to know how to load and order spare shoes, as this is required for the solutions described below. Restart your computer. Enter the BIOS (or UEFI) settings of the computer after it boots up. Which key you press to enter these personal settings depends on your computer’s motherboard manufacturer and can be anything from Esc, Delete or F2 to F8, F10 or F12, often F2. This is displayed throughout the publishing screen, and an included manual comes with your system. A quick Google search for “how do I enter the BIOS?” followed by a set of patterns also produces results. Swim to our boat.
How To Change AHCI While Moving? IDE In Gigabyte BIOS?
Press the F2 key on the LCD screen with the Sun logo to enter the BIOS settings gallery. In di Utility BIOS dialog box, specifically Advanced -> IDE Configuration. The IDE will display this configuration menu. From the IDE configuration menu, select Configure SATA as and press Enter.
How Do I Switch From SATA AHCI Mode To 100% Without Reinstalling?
Type this command and press ENTER: bcdedit /set current secure boot with minimum (ALT: bcdedit / set secure boot minimum) Restart your computer and enter the BIOS setup program. Changing SATA and AHCI operating mode from IDE or RAID.
How Do I Switch From AHCI BIOS To SATA Mode?
Settings in the system BIOS and hard drive configuration for Intel AHCI SATA or RAID Turn on the system . When the Sun logo screen appears, press the F2 critical key to enter the BIOS setup menu. In the Utility BIOS dialog, select Advanced -> IDE Configuration. From the IDE Configuration menu, select Configure SATA and press Enter.
The software to fix your PC is just a click away - download it now.