You may have encountered an error indicating that a blue screen was installed while installing Vista. There are now several ways to solve this problem. We will discuss this shortly.


  • 1. Download ASR Pro
  • 2. Open the program and select "Scan your computer"
  • 3. Click "Repair" to start the repair process
  • The software to fix your PC is just a click away - download it now.

    To fix blue touchscreen error 0x000000D1 or DRIVER_IRQL_NOT_LESS_THAN_OR_EQUAL_TO in Windows Vista, run the plan in Safe Mode and uninstall many of the recently installed device drivers. This error is usually caused by an incompatible driver. Removing should fix someone else’s problem.


    Starting April 9, 2017, Microsoft Windows Vista users will receive new security updates, non-security fixes, free and paid supported options, and changes to online technical content from Microsoft. This article will not be updated for a long time and is for information only. A complete end-of-support statement is available on the Microsoft website.


    1. Whatis a blue screen error?
    2. Eliminate common blue screen error messages
      1. 0x000000ED and 0x0000007B
      2. 0x00000024
      3. 0x0000007E and 0x00000008E
      4. 0x00000050
      5. 0x000000D1
      6. 0x000000EA
    3. Use the debugger
    4. Window

    blue screen installing vista

    This article describes what blue screen errors are, why they occur, how to read them, and how to fix one of the most common error messages.

    This editorial is for Microsoft Windows 7.
    Click below to change the way the current system works.

  • Windows 10
  • Windows 8
  • Windows 7
  • Windows XP
  • Recommended by Dell:


    The ASR Pro repair tool is the solution for a Windows PC that's running slowly, has registry issues, or is infected with malware. This powerful and easy-to-use tool can quickly diagnose and fix your PC, increasing performance, optimizing memory, and improving security in the process. Don't suffer from a sluggish computer any longer - try ASR Pro today!

    How to fix blue screen (shutdown) errors that cause Windows Vista to stop or restart unexpectedly

    What Is A Blue Screen Error?

    Click on the “Advanced Startup” option.Click on the “Troubleshoot” option.Click the User’s Advanced Options button.Click on any System Restore option.Select your current account.Confirm your account password.Click “Next”.Click “Next”.

    When Windows encounters certain scenarios, it pauses and the resulting scan information is displayed in white text on a blue screen. Look at these errors and where toThere was the term “blue screen” or “blue screen of death”.

  • Windows encounters each other’s errors and cannot recover from data loss
  • Windows recognizes that important operating system data has been corrupted
  • Windows detects that hardware fails beyond repair
  • The exact display text has changed over the years, from the dense wall of information here in Windows NT 4.0 to the relatively thin message used by modern versions of Windows built.
  • Troubleshoot Common Blue Screen Error Messages


    0x0000007b These two errors have similar causes, and the same troubleshooting steps are fuzzy for both. These computer codes will always stop during a new process. When an appointment is associated with these stop codes, the following deadlocks occur:

    1. The system has completed the Power On Self Test (POST).
    2. The system has entered NTLDR has transferred control of part of the NTOSKRNL boot process (to the kernel).
    3. NTOSKRNL is overloaded. Either it cannot find a new remnant of itself, or it should not normally read the filesystem at a location that it thinks is permanently stored.
      If you fix this error, your job will be to find out why most Windows kernels are confusing and changes cause confusion.
    Validation Help

  • SATA controller configuration in system BIOS. If all SATA controllers are switched from ATA mode to AHCI mode (or vice versa), Windows will not be able to communicate with the SATA controller at this point because different modes require many drivers. Try changing the SATA controller mode in BIOS.
  • RAID Settings You may receive an error message after trying to configure a RAID controller. Try changing your basic RAID settings back to Autodetect (which is usually the case).
  • Incorrect and poorly adjusted wiring. Try reconnecting the data cables that connect the carousel and gamepad at both ends.
  • Hard Force Failure Run built-in diathe gnostic of the demanding drive. Remember, Code 7 indicates recoverable historical damage, not a hard drive failure.
  • File Kit Corruption Boot the recovery console completely from the Windows installation CD and run chkdsk / f / r.
  • BOOT.INI not configured correctly (Windows Vista). If you unexpectedly deleted or changed the boot.ini file, you may receive Stop Law 0x7B during the boot process. Launch Recovery Console from Windows Installation CD and run BOOTCFG / REBUILD
  • STOP 0x00000024 (NTFS_FILE_SYSTEM)

    blue screen installing vista

    This stop code indicates that the NTFS list system driver has encountered a situation that the software cannot handle and is guaranteed to be caused by three reasons:

    The software to fix your PC is just a click away - download it now.

    Reinstalling Windows will not help because the problem is not with Windows. The problem is what you added to Windows. If you often remember something you installed, uninstall that to see if that helps. A clean install can help because it removes everything and just reinstalls Windows – no third-party software.

    Restart your computer, or turn it off and then turn it back on.Scan your computer for malware and viruses.Start Microsoft Fix IT.We check that the RAM is productively connected to the motherboard.Bad hard drive.Check if the newly equipped device is causing the Blue Screen of Death.