Table of Contents
Approved
Here are some easy ways that can help you fix the f23 hot tub washer error. Fault F23 is caused by a fault in the river heating system. If the temperature does not rise more than 90 degrees Fahrenheit or 30 degrees Celsius within 40 minutes of starting the wash due to water in the washing machine, the controller will definitely register this error.
Error F23 is caused by a new hot water production error. If the water temperature in the current model does not exceed 86 degrees Fahrenheit or 30 degrees Fahrenheit within 40 minutes after the start of the current cycle, the technician will record this error.
What does F23 actually mean in hydromassage washing machines? This means there is a heat loser. If the water temperature in the entire washing machine does not rise 86 degrees, your washing machine is most likely displaying error code F23. To fix spa error f23, follow these steps.
Note: some models do not have a reservoir as shown below, some models have a temperature sensor of approx. If your entire model does not have a heater, check the heat zone sensor.
- Take out the washing machine first.
- Check heating element circuits and make sure it is not burnt, damaged or corroded.
- Check the heating continuity of the element normally associated with the course, if there is no longer any continuity, replace the element.
- Make sure the cables of the water temperature sensor are not corroded or broken.
- SnapshotTake the harness caused by the temperature sensor and measure if it is the resistance of the sensor. On the market, see the table below and replace the actual sensor if the specific range is out of range.
F23 Spa Washing Machine Fault Repair Parts
The part number for the radiator is W10426377 and can be ordered through the connection shown below.
The spare part number for the temperature sensor is W10467289 and can be ordered in the next paragraph.
Whirlpool Washing Machine Heater Repair Video
To remove the computer code, press the Pause or Cancel button twice and the Power button once. If the code continues to be displayed, unplug the washing machine or unplug the juice for one minute. The washing machine was diagnosed with items during the cleaning cycle of the washing machine. Remove foreign matter from most of the drum and restart the cleaning cycle.
Whirlpool Washing Machine Temperature Sensor Repair Video
If you have any questions, problems, or need help troubleshooting an F23 whirlpool washer error, contact one of our faulty technicians by clicking the Live Help button below. Click on your side.
This hot tub washing machine error f23 repair information applies to the models listed below across the entire range of labels and more.
About the author
Technique Mastery
Factory trained equipment. The technical staff has 20 years of experience in repairing household appliances, washing machines, dryers, refrigerators, freezers, dishwashers, etc.
- Registered
- News
- 1
- Location
- Burnaby
- Registered
- News
- 1
- Location
- Burnaby