Table of Contents
Approved
In this user guide, we describe some of the possible causes that might cause Xbox 360 Error 3002 and then suggest possible fixes that you can try to resolve. This error means that your design does not meet the minimum link quality required to participate in multiplayer add-ons. Scott Pilgrim vs. the World: The multiplayer game mode requires 60 FPS in addition to the ping, which therefore tracks 200MS.
Follow the instructions below if you get error code E3XXX on Cronus your Zen.
-
1.
Firmware upgrade with USB cable or terrible port
-
Press the Manual tab on your controller, navigate to controls and select System Settings.Select Network Settings.When prompted, select Wired Network, optionally the name of your cellular network.Select Test Xbox Live Connection.If prompted, enter yes to update the program software.
2.
Power failure during firmware update contenteditable = “false”> 3
-
Connect an efficient input device that is never Zen compatible
An E3 error rule such as E3001 or E3002 is a specific complete system failure that usually occurs when one of the following occurs Next events:
Firmware upgrade using USB cable or non-standard USB port
To regain access to Cronus Zen, you will need to force the device to bootloader mode, upgrade to the most popular firmware, and then update the firmware to the latest version. He does this right after following these simple steps.
Approved
The ASR Pro repair tool is the solution for a Windows PC that's running slowly, has registry issues, or is infected with malware. This powerful and easy-to-use tool can quickly diagnose and fix your PC, increasing performance, optimizing memory, and improving security in the process. Don't suffer from a sluggish computer any longer - try ASR Pro today!
If you have an input device such as a mouse or keyboard that throws a severe E3XXX error every time you connect to Zen, it is very likely that the device is not supported at the moment or it is a viral driver in the firmware. … To resolve this issue, we request that this section of the Cronus Community Support Forum unsupported device … be polled by our user group.
1. With nothing connected to the Zen, press and hold the reset buttons on the bottom of the electronic device. Step This is very important, our own button must be held down BEFORE plugging in the USB cable.
2. While holding the reset button in a comfortable position, connect the Zen micro-USB cable that originally came from the USB port on theDays of console, to a large Windows PC (or Mac for Windows ). …
3. Release the primary reset button once the Zen OLED message screen displays “Zen Bootloader”. The RGB LEDs currently glow blue / magenta, indicating that they are configured for the next step.
If the “Zen to Bootloader” error code E3 does not transmit, then there is an error in Zen and should be returned for replacement.
On your Xbox 360 console, go to Settings, then System.Select Storage, then select your hard drive storage device.SelectThis is the type of content that you usually want to download.Find the item you want to download.Delete the corresponding element with the yellow violence symbol.Clear your Xbox 360 blueprint cache.
4. Open Collective Minds Firmware Upgrade Tool and it will recognize the most important Cronus Zen and display its serial number and current firmware version. Hover over device information and click to continue.
-
Solution 1. Try installing the update again.Solution 2. Make sure you have enough disk space.Solution 3. Clear the main system cache.Solution 4: Reinstall the revocation device.Solution 5. Copy the update to a USB drive or CD / DVD.Solution 6: Upload your profile again.
1.
Micro USB cable defective (you can also try new cables. with another)
-
2.
Low power USB port (try enabling USB hub)
< li>
3.
You are using Windows 7 and the driver was not installed in time (see download page )
If your Cronus Zen is not recognized This feature usually has one of the following specific issues:
Turn off your Xbox by pressing and holding one of the Xbox buttons on the front of the console for about ten seconds until it closes completely.Unplug the power cord from the console. Wait ten seconds.Connect the console power cord holder.Press the Xbox button on your console to turn it back on.
Wrong micro-USB cable (young cables may also be defective, try another one)
You are using Windows 7 and your vehicle has a driver and patch installed (currently see the download page )
5. Slide the “Use latest available version” switch to the right to display all displayed firmware versions. Select the oldest Style firmware (2.0.3-beta.105) from the list below, click Next and then Start to start programming.
Once launched, remove everything from Zen by waiting a few seconds before launching
1. With nothing connected to Zen, press and hold the Recast button at the bottom of the device. Step It is very simple, the button must be held BEFORE connecting the USB cable.
2. While holding down the reset button, connect the micro USB cable to the USB port on the rear console that is connected to your Windows PC (or Windows Mac ).
3. Release the reset button when the main one becomes Zen Boot Loader, as shown in the Zen OLED message screen. RGB LEDs will now probably beThey do not glow blue / magenta to indicate that they are still ready for the next step.
4. Open Collective Minds Firmware Upgrade Tool and it will recognize Cronus Zen and display its serial number and current firmware version. Hover over device information and click to continue.
5. Finally, click “Continue”. Run the update to update the Cronus Zen firmware to the latest version.
So, if your Zen voucher has not recovered from this error code and tried various USB cables, then in all likelihood Zen has encountered an error and should be replaced in accordance with its warranty.
The software to fix your PC is just a click away - download it now.
